| Model C (installed skins - supported at lateral edges) | |||||||||||||
| % Variation For Total Load At Fastener | |||||||||||||
| Crack Config 1 | Crack Config 2 | Crack Config 3 | Crack Config 4 | Crack Config 5 | Rows Extremes | ||||||||
| Min Dlt | Max Dlt | Min Dlt | Max Dlt | Min Dlt | Max Dlt | Min Dlt | Max Dlt | Min Dlt | Max Dlt | Min Dlt | Max Dlt | ||
| Fastener 1 | 90.2 | 100.9 | 89.6 | 100.0 | 81.7 | 100.0 | 92.2 | 100.0 | 92.4 | 106.2 | 81.7 | 106.2 | |
| Fastener 2 | 100.0 | 109.4 | 98.7 | 106.5 | 100.0 | 107.8 | 97.4 | 106.5 | 95.0 | 104.1 | 95.0 | 109.4 | |
| Fastener 3 | 98.3 | 104.4 | 97.8 | 110.5 | 100.0 | 106.7 | 95.0 | 108.8 | 93.4 | 109.9 | 93.4 | 110.5 | |
| Fastener 4 | 98.5 | 102.4 | 98.5 | 106.9 | 97.0 | 101.6 | 98.5 | 105.2 | 96.1 | 103.9 | 96.1 | 106.9 | |
| Fastener 5 | 96.1 | 103.9 | 91.9 | 101.1 | 89.8 | 100.1 | 92.7 | 101.3 | 94.3 | 100.9 | 89.8 | 103.9 | |
| Fastener 6 | 96.8 | 101.5 | 93.5 | 102.2 | 94.6 | 101.1 | 94.2 | 103.0 | 94.6 | 103.6 | 93.5 | 103.6 | |
| Fastener 7 | 96.0 | 100.0 | 93.2 | 102.3 | 95.6 | 103.3 | 96.2 | 100.9 | 93.8 | 101.2 | 93.2 | 103.3 | |
| Fastener 8 | 97.9 | 103.5 | 100.0 | 108.9 | 100.0 | 109.1 | 99.3 | 107.9 | 100.0 | 109.1 | 97.9 | 109.1 | |
| Graphs | C1_P1_CnctNorm_AtHoles_TL_AllFast_PerCent.* to C5_P1_CnctNorm_AtHoles_TL_AllFast_PerCent.* | ||||||||||||
| Config. Extremes | 90.2 | 89.6 | 81.7 | 92.2 | 92.4 | ||||||||
| 109.4 | 110.5 | 109.1 | 108.8 | 109.9 | |||||||||
| Model D (test specimen - lateral edges free) | |||||||||||||
| % Variation For Total Load At Fastener | |||||||||||||
| Crack Config 1 | Crack Config 2 | Crack Config 3 | Crack Config 4 | Crack Config 5 | Rows Extremes | ||||||||
| Min Dlt | Max Dlt | Min Dlt | Max Dlt | Min Dlt | Max Dlt | Min Dlt | Max Dlt | Min Dlt | Max Dlt | Min Dlt | Max Dlt | ||
| Fastener 1 | 92.9 | 100.7 | 88.8 | 100.0 | 83.1 | 100.0 | 87.7 | 101.5 | 92.4 | 105.6 | 83.1 | 105.6 | |
| Fastener 2 | 97.7 | 103.6 | 92.7 | 103.9 | 98.2 | 108.1 | 91.5 | 103.7 | 92.6 | 101.7 | 91.5 | 108.1 | |
| Fastener 3 | 99.4 | 105.5 | 100.0 | 110.9 | 100.0 | 109.1 | 99.6 | 109.3 | 98.1 | 106.9 | 98.1 | 110.9 | |
| Fastener 4 | 96.7 | 102.5 | 97.4 | 104.1 | 96.0 | 103.7 | 97.9 | 106.0 | 95.2 | 104.6 | 95.2 | 106.0 | |
| Fastener 5 | 94.8 | 102.3 | 91.0 | 102.1 | 84.9 | 104.7 | 91.0 | 101.4 | 92.3 | 102.7 | 84.9 | 104.7 | |
| Fastener 6 | 94.3 | 103.7 | 97.1 | 104.1 | 96.4 | 106.9 | 96.6 | 105.7 | 97.6 | 104.5 | 94.3 | 106.9 | |
| Fastener 7 | 99.2 | 105.3 | 100.0 | 107.7 | 99.1 | 109.9 | 98.2 | 106.4 | 95.7 | 106.5 | 95.7 | 109.9 | |
| Fastener 8 | 95.9 | 102.1 | 95.3 | 102.1 | 98.2 | 101.8 | 96.0 | 102.8 | 96.0 | 104.0 | 95.3 | 104.0 | |
| Graphs | D1_P1_CnctNorm_AtHoles_TL_AllFast_PerCent.* to D5_P1_CnctNorm_AtHoles_TL_AllFast_PerCent.* | ||||||||||||
| Config. Extremes | 92.9 | 88.8 | 83.1 | 87.7 | 92.3 | ||||||||
| 105.5 | 110.9 | 109.9 | 109.3 | 106.9 | |||||||||