Configuration Definitions in Plate 1 model C and model D (view looking from contact face with plate 2) | Start Length (inch) [L/D]3 | End Length (inch) [L/D]3 | Nr Growth Steps NAS runs | Nr Results Files Post Proc. | Notes | |
Baseline |
| 0.0 [0.0] | 0.0 [0.0] | 1 | 160 | Baseline reference for each model |
Config. 1 |
| 0.03 [0.16] | 0.430 [2.27] | 10 | 1600 | Single sided from hole edge to free edge |
Config. 2 |
| 0.65 [3.41] | 0.91 [4.80] | 20 | 3260 | Single sided from broken edge to hole #2 |
Config. 3 |
| 0.27 [1.42] | 1.15 [6.07] | 8 | 1304 | Dbl. sided from hole edges to free edge & next hole (until becomes Config 2) |
Config. 4 |
| 0.03 [0.16] | 0.94 [4.96] | 20 | 3280 | Single sided from hole edge to next hole edge (1->2) |
Config. 5 |
| 0.03 [0.16] | 0.94 [4.96] | 20 | 3260 | Single sided from hole edge to next hole edge (2->1) |