# | Measurement point | cm | # | Measurement point | cm |
1 | Total length | 890 | GE | Girth at ear | 193 |
2 | Tip of snout to the highest point of dorsal fin | 580 | GAx | Girth at axilla | 231 |
3 | Tip of snout to blowhole | 134 | GU | Girth at umbilicus | 203 |
4 | Projection of tip of snout to lower jaw | 10 | GAn | Girth at anus | 135 |
5 | Tip of snout to the beginning of ventral groove | 44 | a | Blubber thickness at GE (dorsal site) | 6.8 |
6 | Tip of snout to the terminal point of ventral groove | 196 | |||
7 | Tip of snout to eye (center) | 152 | b | Blubber thickness at GE (lateral site) | 4.0 |
8 | Tip of snout to angle of gape | 145 | |||
9 | Tip of snout to ear | 198 | c | Blubber thickness at GU (dorsal site) | 14.6 |
10 | Tip of snout to tip of flipper | 394 | |||
11 | Tip of snout to umbilicus | 471 | d | Blubber thickness at GU (lateral site) | 8.8 |
12 | Tip of snout to reproductive aperture | 584 | |||
13 | Tip of snout to anus | 629 | e | Blubber thickness at GU (ventral site) | 10.0 |
14 | Flipper, tip to anterior insertion | 143 | |||
15 | Flipper, tip to posterior insertion | 117 | f | Blubber thickness at the front of the ridge (dorsal site) | 17.6 |
16 | Flipper, maximum width | 58 | |||
17 | Flukes, depth | 77 | |||
18 | Flukes, tip to tip | 216 | g | Blubber thickness at the front of the ridge (lateral site) | 6.1 |
|
|
| |||
|
|
| h | Blubber thickness at the front of the ridge (ventral site) | 10.8 |