Sl. No. | Name of the components | Number | Size (mm) | Materials used |
1 | Handle | 01 | Length: 1194 and Dia: 26 | 26 mm dia. MS pipe |
2 | Handlebar/griper | 01 | Length: 250 and Dia: 26 | 26 mm dia. MS pipe |
3 | Rotor | 02 | Length: 119, Larger Dia: 130, and Smaller Dia: 55 | 18-gauge M. S. sheet |
4 | Rotor to Rotor distance | - | 222 | - |
5 | Blade in each rotor | 12 (6 Plain blades and 6 serrated blades | Plain blade Length: one side 125 and another side 110, Width: 45 & Thickness: 2 Serrated blade length: 85, Width: 45 | 18-gauge M. S. sheet |
6 | Blade angle | - | 90 degrees toward motion from the vertical line |
|
7 | Main axle or spindle in each rotor | 01 | Length (L): 140, Dia of top: 20 & Dia of axle/spindle: 15 | M. S. Shaft |
8 | Bush in each rotor | 01 | Bush Length:121, Inner dia: 15, and Outer dia:18 | M. S. Shaft |
9 | Height adjustment lever | 02 | Length = 200, width 20 with 4 mm thickness | M. S. flat bar |
10 | Joint nut-bolt | 08 | Dia 10 | - |
11 | Skid | 01 | Width: 124, Length: 344, Front 142, 22 degree up from the baseline. Sidewall height 64, front side wall 38, front radius 62 | 18-gauge M. S. sheet |