d = 0.73 mm ® 1.25 mm
Adding Ball Peening & Brush Process
(a)
SANDVIK 20C 0.178t (Carbon Steel)
®SANDVIK 7C 0.178t (Stainless Steel)
Adding tumbling process
(b)
|
|
|
|
d = 0.73 mm ® 1.25 mm Adding Ball Peening & Brush Process (a) | SANDVIK 20C 0.178t (Carbon Steel) ®SANDVIK 7C 0.178t (Stainless Steel) Adding tumbling process (b) |