View |
| ||||
2 |
| 14. Public buildings: 75% of the used spaces have direct visual contact with the outside. Residential buildings: 75% of the bedrooms and living spaces have a direct visual contact with the outside. | 2 | ||
Sound Transmission |
| ||||
1 |
| 15. Sound transmission coefficient in external walls STC > 50 db. | 1 | ||
1 |
| 16. Sound transmission coefficient in interior walls and floors STC > 50 db. | 1 | ||
1 |
| 17. The transmission coefficient of sound resulting from roads or collisions in the floors IIC > 56 db. | 1 | ||
Safe & Secure Environment |
| ||||
3 |
| 18. All pollutants conform to the specified specifications and not exceed the local and international standards. | 3 | ||
45 | 15 | 3. Energy Use Efficiency | 60 Points-30% | ||
Y |
| Pre required | 1. Planning for building energy systems. | ||
Y |
| Pre required | 2. Achieve minimum energy efficiency and consumption. | ||
Y |
| Pre required | 3. Planning to manage cooling systems in the building. | ||
Achieving the best minimum use energy efficiency. |
| ||||
5 |
| 4. Ensure that the upper limit of the thermal conductivity of the walls is not exceeded. | 5 | ||
5 |
| 5. Ensure that the upper limit of the thermal conductivity of the upper ceiling is not exceeded. | 5 | ||
5 |
| 6. Ensure that the upper limit of the thermal conductivity of the windows is not exceeded. | 5 | ||
| 3 | 7. Ensure that the maximum windows shading factor is not exceeded. | 3 | ||
| 3 | 8. Ensure that the minimum light transmittance of windows is not exceeded. | 3 | ||
2 |
| 9. Ensure that the upper limit of the thermal conductivity of the doors is not exceeded. | 2 | ||
2 |
| 10. Ensure that the upper limit of air leakage is not exceeded. | 2 | ||
Exploiting Renewable Energy |
| ||||
6 |
| 11. Building design using passive solar energy. | 6 | ||
| 4 | 12. Using solar and wind energy to generate electricity. | 4 | ||
4 |
| 13. Using solar heaters to heat water. | 4 | ||
4 |
| 14. Use of ground energy or bioenergy. | 4 | ||
Efficiency of equipment and devices used in buildings (Air conditioning devices and systems) |
| ||||
1 |
| 15. Commitment to the efficiency of the devices used. | 1 | ||
1 |
| 16. Commitment to using environmentally friendly materials in the manufacture of these devices. | 1 | ||
1 |
| 17. Adhere to the permissible noise level. | 1 | ||
1 |
| 18. Using efficient controllers to control usage. | 1 | ||
0.5 |
| 19. Controllers can be linked with BMS (Building Management System). | 0.5 | ||
1 |
| 20. Use of variable motors with Inverter. | 1 | ||
0.5 |
| 21. Use of energy recovery systems | 0.5 | ||
Efficiency of equipment and devices used in buildings (Water heating devices) |
| ||||
| 1 | 22. Use of temperature control devices. | 1 | ||