Precondition—Delete the pole of in the front of member function of .

ID

Input

Expected output

PQMS2-ACF-UNI-TC020-MF

Start the “Drawing layout parameter setting” sheet from the XAve-R chart interface, and input “11” in the EidtBox “Caption offset”, and input “1000” in the EidtBox “Right space”, and input “820” in the EidtBox “Limits offset”, and input “1000” in the EidtBox “y offset”, and input “220” in the EidtBox “x offset”, and input “30” in the EidtBox “Judgment output”, and input “−530” in the EidtBox “Coordinate axle offset”, and input “750” in the EidtBox “Ry offset”, and input “220” in the EidtBox “Rx offset”, and input “130” in the EidtBox “R judgment output”, and input “−340” in the EidtBox “R coordinate axle offset”, and click button “OK” finally.

Update displaying precisely with correct layout of “offset of R coordinate axle” and no prompt of error information.