| Preliminary Test | Test Conducted | Standard Used | Total Number of Samples | Parameter Measured |
| Test on Aggregates | Sieve Analysis | AASHTO T27 (2020), BS: 812-103 (103) | Coefficient of Uniformity | |
| Coarse | 3 | |||
| Fine | 3 | |||
| Specific Gravity | ASTM D854-14 (2014), BS 812 Part 2: 1999 | Specific gravity | ||
| Coarse | 3 | |||
| Fine | 3 | |||
| Test on Bitumen | Bulk Specific Gravity | AASHTO T53 (2010) | 3 | Bulk Specific Gravity |
| Viscosity | ASTM (2014) | 3 | Flow | |
| Softening Point | AASHTO T53 (2010) | 3 | Softening and harden point | |
| Penetration | ASTM D946 (2006) | 3 | Consistency | |
| Mix Design Properties | Stability | ASTM D6927 | 9 | Stability |
| Flow | 9 | Flow | ||
| Density | 9 | Density | ||
| Air voids | 9 | Air voids | ||
| Voids in Mineral Aggregates | 9 | Voids in Mineral Aggregates |