Parameters | Sample Group | |||
A | B | C | D | |
No. of samples | 1 | 1 | 1 | 1 |
Material | PLA | PLA+ | ABS | ABS+ |
Colour | Glass Blue | Silver | Brown | White |
Average weight (g) | 19.2013 | 20.5155 | 10.2642 | 16.1946 |
AM process | FDM (Fused Deposition Modeling) | |||
Layer height (mm) | 0.1 | |||
Infill density (%) | 100 | |||
Nozzle diameter (mm) | 0.3 | |||
Nozzle temperature (˚C) | 220 | |||
Printing speed (mm/s) | 30 | |||
Extrude of material (layer width) (mm) | 0.36 | |||
Speed for non-print moves (mm) | 60 | |||
Vertical shells | 1 | |||
Cooling rate | Built-in | |||
Bed temperature (˚C) | Room temperature | |||
Room temperature (˚C) | 25 ± 1 | |||
Relative humidity (% RH) | 40 ± 5 |