| Parameters | Sample Group | |||
| Material | PLA | PLA+ | ABS | ABS+ |
| Colour | Glass Blue | Silver | Brown | White |
| Print temperature (˚C) | 190 - 210 | 205 - 225 | 220 - 260 | 220 - 260 |
| Bed temperature (˚C) | No heat (60 - 80) | No heat (60 - 80) | 110 | 110 |
| Density (g/cm3) | 1.24 | 1.24 | 1.04 | 1.06 |
| Distortion temperature (˚C, 0.45 MPa) | 56 | 52 | 78 | 73 |
| Melt flow index (g/10mln) | 5 (190˚C/2.16 Kg) | 2 (190˚C/2.16 Kg) | 12 (220˚C/10 Kg) | 15 (220˚C/10 Kg) |
| Tensile strength (MPa) | 65 | 60 | 43 | 40 |
| Elongation at break (%) | 8 | 29 | 22 | 30 |
| Bending strength (MPa) | 97 | 87 | 66 | 68 |
| Flexural modulus (MPa) | 3600 | 3642 | 2348 | 2443 |
| IZOD impact strength (KJ/m2) | 4 | 7 | 19 | 42 |