| Item | Setting |
| Use of automatic inflation | Program controlled |
| Inflation option | Total thickness |
| Inflation algorithm | Pre |
| View advanced option | Yes |
| Collision avoidance | Stair stepping |
| Growth rate type | Geometric |
| Use of post smoothing | Yes |
| Number of layers | 5 |
| Growth rate | 1.2 |
| Maximum thickness | 2.0 mm |
| Gap factory | 0.5 |
| Maximum length over base | 1 |
| Maximum angle | 140.0 |
| Fillet ratio | 1 |
| Smoothing iteration | 5 |