Parameters | Value | Unit |
Torque TL | 260 × 103 | [N・mm] |
Gear ratio u | 1.814 | [-] |
Module m | 4 | [mm] |
Number of teeth z | 21 | [-] |
Face width b | 34 | [mm] |
Form factor YF | 2.87 | [-] |
Stress correction factor YS | 1.6 | [-] |
Application factor KA | 1.25 | [-] |
Dynamic factor KV | 1.14 | [-] |
Transverse load factor KFα | 1.2 | [-] |
Nominal stress number σFLim | 350 | [N/mm2] |
Life factor YN | 1 | [-] |
Relative notch sensitivity factor Yδ | 1 | [-] |
Relative surface factor YR | 1 | [-] |
Size factor YX | 1 | [-] |
Zone factor ZH | 2.36 | [-] |
Elasticity factor ZE | 189.8 | [N/mm2]1/2 |
Transverse load factor KHα | 1.2 | [-] |
Allowable stress number σHLim | 1400 | [N/mm2] |
Life factor ZN | 1 | [-] |
Roughness factor ZR | 1 | [-] |
Work hardening factor ZW | 1 | [-] |
Size factor ZX | 1 | [-] |