ID | Input | Expected output |
PQMS2-SMF-UNI-TC010 | Starting “Basic setting of monitoring” sheet from the menu item of “Basic Setting - Basic setting of monitoring”, and input “0.001” in the ComBoBox of “Data Accuracy”, and input “Single data - Automatic” in the ComBoBox of “Moving mode”, and input “More than or equal to 10 and less than 1000” in the ComBoBox of “Sampling limit of counting chart” while the information of tester is kept invariant, and click the “Setting” button finally. | Correctly displaying the prompt of “The setting of control chat is saved.” and no prompt of error information. |
PQMS2-SMF-UNI-TC011 | In the “Basic setting of monitoring” sheet, input “ ” in the “ComBoBox” of “Data Accuracy”, and input “Single data - Automatic” in the “ComBoBox” of “Moving mode”, and input “More than or equal to 10 and less than 1000” in the “ComBoBox” of “Sampling limit of counting chart” while the information of tester is kept invariant, and click the “Setting” button finally. | Displaying the prompt of “The setting of data accuracy is error, and only two values, i.e. 0.01 and 0.001.” |
PQMS2-SMF-UNI-TC012 | In the “Basic setting of monitoring” sheet, input “0.001” in the “ComBoBox” of “Data Accuracy”, and input “ ” in the “ComBoBox” of “Moving mode”, and input “More than or equal to 10 and less than 1000” in the “ComBoBox” of “Sampling limit of counting chart” while the information of tester is kept invariant, and click the “Setting” button finally. | Displaying the prompt of “The setting of moving mode is error, and only giving the mode of ‘Single data-Automatic’”. |
PQMS2-SMF-UNI-TC013 | In the “Basic setting of monitoring” sheet, input “0.001” in the “ComBoBox” of “Data Accuracy”, and input “Single data - Automatic” in the “ComBoBox” of “Moving mode”, and input “ ” in the “ComBoBox” of “Sampling limit of counting chart” while the information of tester is kept invariant, and click the “Setting” button finally. | Displaying the prompt of “The setting of sampling limit of counting chart is error, and the number must be more than 0 and less than 10,000”. |