ID | Start state | End state | Input | Expected output |
PQMS2-IDS-UNI-TC010 | S0 | S1 | Start the “Inspection process” sheet from main interface. | Display the “Inspection process” sheet. |
PQMS2-IDS-UNI-TC011 | S1 | S7 | No inputting operation, click the “Shut-off” button of up-right corner in the sheet. | Exit. |
PQMS2-IDS-UNI-TC012 | S1 | S2 | Start the “Inspection process” sheet again, and open the category item of four layers. | Display correctly the opened item among four layers. |
PQMS2-IDS-UNI-TC013 | S2 | S3 | Click the item of inspection process of the category. | Display correct data of clicked item in the “List control”. |
PQMS2-IDS-UNI-TC014 | S3 | S4 | Click the record of inspection process in the “List control”. | Display all data of clicked record in below input controls. |
PQMS2-IDS-UNI-TC015 | S4 | S3 | Input correct data in the sheet, and click the button “Add” finally. | Save data, and display all data in the “List control”. |
PQMS2-IDS-UNI-TC016 | S4 | S6-1 | When the input of code is empty, click the button “Add” finally. | Prompt error information. |
PQMS2-IDS-UNI-TC017 | S6-1 | S4 | Click the button “OK” or the “Shut-off” button of up-right corner. | Return. |
PQMS2-IDS-UNI-TC018 | S4 | S5-1 | Modify data correctly in input controls, and click the button “Modify” finally. | Display the confirming dialogue of modifying. |
PQMS2-IDS-UNI-TC019 | S5-1 | S4 | Click the button “Cancel” of the confirming dialogue. | Return. |
PQMS2-IDS-UNI-TC020 | S4 | S5-1 | Click the button “Modify” of the sheet again. | Display the confirming dialogue of modifying. |
PQMS2-IDS-UNI-TC021 | S5-1 | S3 | Click the button “OK” of the confirming dialogue. | Save data, and display all data in the “List control”. |
PQMS2-IDS-UNI-TC022 | S4 | S6-2 | When the input of code is empty, click the button “Modify” finally. | Prompt error information. |
PQMS2-IDS-UNI-TC023 | S6-2 | S4 | Click the button “OK” or the “Shut-off” button of up-right corner in the dialogue. | Return. |
PQMS2-IDS-UNI-TC024 | S4 | S5-2 | Input the data for deleting in input controls, and click the button “Delete” finally. | Display the confirming dialogue of deleting. |
PQMS2-IDS-UNI-TC025 | S5-2 | S4 | Click the button “Cancel” of the confirming dialogue. | Return. |
PQMS2-IDS-UNI-TC026 | S4 | S5-2 | Click the button “Delete” of the sheet again. | Display the confirming dialogue of deleting. |