ID

Input

Expected output

PQMS2-IDF-UNI-TC030

Start inspection process sheet from the menu item “Basic quality data - Inspection process” in main program interface, and click the branch item of “Tree control” on the left—“TUMC - PC101Shanghai Brand K3 loudspeaker box - PC101000FrontRedNet - PC101000000 Plating flaw of FrontRedNet (0 10)”. EditBox of “Product Code and Name” display “PC101Shanghai Brand K3 loudspeaker box”, EditBox of “Part Code and Name” display “PC101000 FrontRedNet”, and choose this column in the “List control”. And in below input controls, alter the code to “PC101000001”—it has not been added, name to “Elasticity of FrontRedNet”, type to “Performance inspection of raw material”, division to “TUMC_ST StoreHouse”, code of drawing to “ID_PC101000001”, date to “2020.03.01”, Mem to “Shanghai”, then click the button “Add”.

Correctly prompt “Inspection process data of PC101000001 is added”, and the data item changed in the “List control”, and no other error information prompt.

PQMS2-IDF-UNI-TC031

After TC030, click the record “PC101000001” in the list, and display all data on the below box, then click the button “Add”.

Display error prompt “Data of PC101000001 has been already added”.

PQMS2-IDF-UNI-TC032

Start inspection process sheet, and input “ ” in EditBox of “Product Code and Name”, input “PC101000 FrontRedNet” in EditBox of “Part Code and Name”, and keep others no change, then click the button “Add”.

Display error prompt “Product code and name has not been input”.

PQMS2-IDF-UNI-TC033

Start inspection process sheet, and input “PC101Shanghai Brand K3 loudspeaker box” in EditBox of “Product Code and Name”, and input “ ” in EditBox of “Part Code and Name”, and keep others no change, then click the button “Add”.

Display error prompt “Part code and name has not been input”.

PQMS2-IDF-UNI-TC034

Start inspection process sheet, and input “PC101Shanghai Brand K3 loudspeaker box” in EditBox of “Product Code and Name”, and input “PC101000FrontRedNet” in EditBox of “Part Code and Name”, and choose this record in the “List control”, and input “ ” in EditBox “Code of inspection process”, keep others no change, then click the button “Add”.

Display error prompt “The code of inspection process has not been input”.