| ID | Start state | End state | Input | Expected output |
| PQMS2-PDS-UNI-TC010 | S0 | S1 | Start the product or class sheet with default. | Display this sheet. |
| PQMS2-PDS-UNI-TC011 | S1 | S5 | No inputting operation, click the button of “OK” or “Shut-off” button of up-right corner in the sheet. | Exit. |
| PQMS2-PDS-UNI-TC012 | S2-1 | S2-1 | Start the product or class sheet again, and input data in this sheet. | Display the data of inputting. |
| PQMS2-PDS-UNI-TC013 | S2-1 | S2-2 | After data was input, click the button “Add”. | Save data, and display data in the “List control”. |
| PQMS2-PDS-UNI-TC014 | S2-1 | S4-1 | Input “ ” in the EditBox of “Code of product or class”, and click the button “Add”. | Display the error message prompt. |
| PQMS2-PDS-UNI-TC015 | S4-1 | S2-1 | Click the button of “OK” or “Shut-off” button of up-right corner in the prompt dialogue. | Return. |
| PQMS2-PDS-UNI-TC016 | S2-1 | S3-1 | Modify data in the sheet, and click the button “Modify”. | Display the confirm dialogue. |
| PQMS2-PDS-UNI-TC017 | S3-1 | S2-1 | Click the button of “Cancel” in the confirm dialogue. | Return. |
| PQMS2-PDS-UNI-TC018 | S3-1 | S2-2 | Click the button “Modify” again, and click the button of “OK” in the confirm dialogue. | Save data and display data in the list. |
| PQMS2-PDS-UNI-TC019 | S2-1 | S4-2 | Input “ ” in the EditBox of “Name of product or class”, and click the button “Modify”. | Display the error message prompt. |
| PQMS2-PDS-UNI-TC020 | S4-2 | S2-1 | Click the button of “OK” or “Shut-off” button of up-right corner in the prompt dialogue. | Return. |
| PQMS2-PDS-UNI-TC021 | S2-1 | S3-2 | Input the data for deleting, and click the button “Delete”. | Display the confirm dialogue. |
| PQMS2-PDS-UNI-TC022 | S3-2 | S2-1 | Click the button of “Cancel” in the confirm dialogue. | Return. |
| PQMS2-PDS-UNI-TC023 | S3-2 | S2-2 | Click the button “Delete” again, and click the button of “OK” in the confirm dialogue. | Complete the deleting of data. |
| PQMS2-PDS-UNI-TC024 | S2-1 | S4-3 | Input the code with less character than specification, and click the button “Delete”. | Display the error message prompt. |
| PQMS2-PDS-UNI-TC025 | S4-3 | S2-1 | Click the button of “OK” or “Shut-off” button of up-right corner in the prompt dialogue. | Return. |
| PQMS2-PDS-UNI-TC026 | S2-1 | S5 | In the product or class sheet, when inputting data, click the button of “Cancel”. | Exit. |