Items | Items | 2009-Quarter 1 | 2009-Quarter 2 | ||||
Rate | Weighting | Total | Rate | Weighting | Total | ||
Earthworks |
|
|
|
|
| ||
1 | Trenches width exceeding 300 mm; depth not exceeding 2.00 m | 5.07 | 1.80 | 9.12 | 5.75 | 1.8 | 10.35 |
2 | Filling to make up levels with imported laterite deposited in layers 225 mm maximum thick and compacted | 15.71 | 1.71 | 26.87 | 17.17 | 1.71 | 29.35 |
In-Situ Concrete |
|
|
|
|
|
| |
Plain in-situ concrete (1:3:6 - 40 mm Aggregate) or 20 N/mm2-40 mm Aggregate in: - |
|
|
|
|
|
| |
3 | Foundations poured on or against earth or unblinded hardcore | 161.14 | 5.86 | 944.27 | 177.55 | 5.86 | 1040.44 |
Reinforced vibrated in-situ concrete (1:2:4 - 20 mm Aggregate) or 30 N/mm2-20 mm Aggregate in |
|
|
|
|
|
| |
4 | Columns/lintel/beam/slab | 173.32 | 12.69 | 2199.38 | 228.28 | 12.69 | 2896.86 |
Reinforcement |
|
|
|
|
|
| |
5 | 12 mm diameter bars | 2287.12 | 7.63 | 17,450.73 | 2313.22 | 7.63 | 17,649.89 |
6 | 16 mm diameter bars | 2279.69 | 7.13 | 16,4254.22 | 2267.57 | 7.13 | 16,167.75 |
7 | 20 mm diameter bars | 2404.08 | 5.09 | 12,236.74 | 2343.66 | 5.09 | 11,929.23 |
Formwork for In-Situ Concrete |
|
|
|
|
|
| |
8 | Sawn formwork to vertical side of columns | 10.11 | 5.12 | 51.74 | 13.62 | 5.12 | 69.74 |
Masonry |
|
|
|
|
|
| |
Solid blockwork; sandcrete blocks in cement and/sand (1:6) mortar |
|
|
|
|
|
| |
Walls |
|
|
|
|
|
| |
9 | 150 mm thick | 19.12 | 8.02 | 153.36 | 23.59 | 8.02 | 189.18 |
10 | 125 mm thick |
|
|
|
|
|
|
Plastered/Rendered/Roughcast Coatings |
|
|
|
|
|
| |
13 mm thick Cement/Sand (1:6) plaster steel trowelled smooth in. |
|
|
|
|
|
| |
11 | Walls; width exceeding 300 mm; to blockwork | 3.85 | 5.25 | 20.19 | 7.34 | 5.25 | 38.51 |
12 | Ditto 40 mm thick screeded backing bed (1:6) in cement and sand | 16.36 | 3.75 | 61.35 | 17.58 | 3.75 | 65.92 |
| Stone/Concrete/Quarry/Ceramic Tilling/Mosaic |
|
|
|
|
|
|
13 | 400 × 400 mm Ceramic/porcelain Tiles | 25.47 | 5.01 | 127.61 | 31.96 | 5.01 | 160.11 |
Painting/Clear Finishing |
|
|
|
|
|
| |
Two undercoats and one finishing coat of “Coral” or equally approved local Emulsion Paint on |
|
|
|
|
|
| |
14 | Rendered walls; girth; exceeding 300 mm | 2.96 | 6.91 | 20.47 | 9.83 | 6.91 | 67.89 |
Joinery |
|
|
|
|
|
| |
15 | 50 × 150 mm hardwood frame plugged to concrete work or blockwork including 38 mm × 13 mm sawn hardwood grounds | 7.95 | 5.35 | 42.55 | 10.16 | 5.35 | 54.37 |
16 | Hardwood framed panel door 800 × 2050 × 44 mm (finished) 2 leaf in solid hardwood Redwood (D2) | 162.70 | 2.67 | 434.40 | 177.55 | 2.67 | 474.06 |
Structural/Carcasing Metal/Timber/Carpentry/Timber Framing/First Fixing |
|
|
|
|
|
| |
Sawn treated hardwood |
|
|
|
|
|
| |
17 | 50 × 100 mm purlins | 3.07 | 1.65 | 5.06 | 4.21 | 1.65 | 6.94 |
18 | 50 × 150 mm ceiling joist and noggings | 5.68 | 2.15 | 12.22 | 5.86 | 2.15 | 12.60 |
Metalwork |
|
|
|
|
|
| |
19 | 19 mm diameter mild steel bar threaded through window frames as burglar proofing including boring of frame | 3.33 | 2.07 | 6.89 | 12.52 | 2.07 | 25.91 |
20 | Pair louvre carriers 1125 mm long with clips for 8 no. 150 mm blades with dual control | 34.41 | 2.31 | 79.49 | 48.36 | 2.31 | 111.72 |
Cladding/Covering/Aluminium Strip Sheet Coverings |
|
|
|
|
|
| |
21 | 0.6 mm corrugated aluminum roofing sheets laid with two and a half corrugations side laps and 150 mm end laps and fixed to hardwood purlins (measured separately) with approved screws and washers to match | 19.13 | 3.26 | 62.36 | 35.64 | 6.72 | 239.51 |
22 | 0.35 mm corrugated aluminum roofing sheets laid with two and a half corrugations side laps and 150 mm end laps and fixed to hardwood purlins (measured separately) with approved screws and washers to match | 26.47 | 3.46 | 91.60 |
|
|
|
Glazing: obscure Sheet Glass |
|
|
|
|
|
| |
23 | 6 mm thick clear sheet glass louvre blades 150 mm wide and not exceeding 900 mm long fixed into metal clip of louvre carrier | 2.48 | 1.11 | 2.75 | 3.33 | 1.11 | 3.70 |
TOTAL |
| 50,293.37 |
| 51,244.05 |