| Description | Rate | Preliminaries | Total | |
| Earthworks |
|
| ||
| 1 | Trenches width exceeding 300 mm; depth not exceeding 2.00 m | 5.52 | 1.07 | 5.90 |
| 2 | Filling to make up levels with imported laterite deposited in layers 225 mm maximum thick and compacted | 15.6 | 1.07 | 16.69 |
| In-Situ Concrete |
|
|
| |
| 3 | Plain in-situ concrete (1:3:6 - 40 mm Aggregate) or 20 N/mm2-40 mm Aggregate in: - |
|
|
|
| Foundations poured on or against earth or unblinded hardcore | 128.21 | 1.07 | 137.18 | |
| 4 | Reinforced vibrated in-situ concrete (1:2:4 - 20 mm Aggregate) or 30 N/mm2-20 mm Aggregate in |
|
|
|
| Columns/lintel/beam/slab | 160.7 | 1.07 | 171.95 | |
| Reinforcement |
|
|
| |
| 5 | 12 mm diameter bars | 1957 | 1.07 | 2093.99 |
| 6 | 16 mm diameter bars | 1945 | 1.07 | 2081.15 |
| 7 | 20 mm diameter bars | 1903 | 1.07 | 2036.21 |
| Formwork for In-Situ Concrete |
|
|
| |
| 8 | Sawn formwork to vertical side of columns | 10.1 | 1.07 | 10.81 |
| Masonry |
|
|
| |
| Solid blockwork; sandcrete blocks in cement and/sand (1:6) mortar |
|
|
| |
| 9 | 150 mm thick | 13.95 | 1.07 | 14.92 |
| 10 | 125 mm thick | 13.16 | 1.07 | 14.08 |
| Plastered/Rendered/Roughcast Coatings |
|
|
| |
| 13 mm thick Cement/Sand (1:4) plaster steel trowelled smooth in. |
|
|
| |
| 11 | Walls; width exceeding 300 mm to blockwork | 4.68 | 1.07 | 5.01 |
| 12 | Ditto 40 mm thick screeded backing bed (1: 4) in cement and sand | 8.54 | 1.07 | 9.14 |
|
| Stone/Concrete/Quarry/Ceramic Tilling/Mosaic |
|
|
|
| 13 | 400 × 400 mm Ceramic/porcelain Tiles | 20.24 | 1.07 | 21.66 |
| Painting/Clear Finishing |
|
|
| |
| Two undercoats and one finishing coat of “Coral” or equally approved local Emulsion Paint on |
|
|
| |
| 14 | Rendered walls; girth; exceeding 300 mm | 2.34 | 1.07 | 2.50 |
| Joinery |
|
|
| |
| 15 | 50 × 150 mm hardwood frame plugged to concrete work or blockwork including 38 mm × 13 mm sawn hardwood grounds | 4.28 | 1.07 | 4.57 |
| 16 | Hardwood framed panel door 800 × 2050 × 44 mm (finished) 2 leaf in solid hardwood Redwood (D2) | 122.37 | 1.07 | 130.94 |
| Structural/Carcasing Metal/Timber/Carpentry/Timber Framing/First Fixing |
|
|
| |
| sawn treated hardwood |
|
|
| |
| 17 | 50 × 100 mm purlins | 2.88 | 1.07 | 3.08 |
| 18 | 50 × 150 mm ceiling joist and noggings | 1.35 | 1.07 | 1.44 |
| Metalwork |
|
|
| |
| 19 | 19 mm diameter mild steel bar threaded through window frames as burglar proofing including boring of frame | 3.45 | 1.07 | 3.69 |
| 20 | Pair louvre carriers 1125 mm long with clips for 8 no. 150 mm blades with dual control | 28.6 | 1.07 | 30.60 |
| Items | Description | Rate | Preliminaries | Total |
| Cladding/Covering/Aluminium Strip Sheet Coverings | ||||
| 21 | 0.6 mm corrugated aluminum roofing sheets laid with two and a half corrugations side laps and 150 mm end laps and fixed to hardwood purlins (measured separately) with approved screws and washers to match | 21.58 | 1.07 | 23.09 |
| 22 | 0.35 mm corrugated aluminum roofing sheets laid with two and a half corrugations side laps and 150 mm end laps and fixed to hardwood purlins (measured separately) with approved screws and washers to match | 21.53 | 1.07 | 23.04 |
| Glazing: obscure Sheet Glass |
|
|
| |
| 23 | 6 mm thick clear sheet glass louvre blades 150 mm wide and not exceeding 900 mm long fixed into metal clip of louvre carrier | 2.3 | 1.07 | 2.46 |