ICP-MS parameters |
|
|
|
| |
Analysis lines |
|
|
|
| |
Elements | Wavelength | Types | PPP | Atomic weight | |
Cu | 324.754 | Analyte | 2 | 63.54 | |
Mn | 257.610 | Analyte | 2 | 54.94 | |
Pb | 220.353 | Analyte | 2 | 207.19 | |
Zn | 206.200 | Analyte | 2 | 65.57 | |
Fe | 238.204 | Analyte | 2 | 55.85 | |
Cr | 267.716 | Analyte | 2 | 52.00 | |
Se | 196.09 | Analyte | 2 | 78.96 | |
As | 189.04 | Analyte | 2 | 74.92 | |
Conditions set | |||||
Power (Kw) | 1.20 | ||||
Plas flow (L/min) | 15.0 | ||||
Aux flow (L/min) | 1.50 | ||||
Neb flow (L/min) | 0.75 | ||||
Replicate times (s) | 5.000 | ||||
Stab range (s) | 10 | ||||
Sample uptake (s) | 7 | ||||
Rinse time (s) | 10 | ||||
Pump rate (rpm) | 30 | ||||
Fast pump | On | ||||
Calibration setting |
| ||||
Calibration Mode | Quantitative | ||||
No. Standard | 5 | ||||
Corr Coeff Limit | 0.995000 | ||||
Standard concentration for each metal |
| ||||
Standard 1 | 0.01000 | ||||
Standard 2 | 0.10000 | ||||
Standard 3 | 1.00000 | ||||
Standard 4 | 10.0000 | ||||
Standard 5 | 50.0000 | ||||