Symbol | Morphometric parameters | Description/formula | References |
A | Area of the basin (km2) | Area is delimited by the water divide |
|
P | Perimeter of the basin (km) | Length of the horizontal projection of the divide |
|
| Max elevation of the basin (m) | The maximum altitude of a basin |
|
| The elevation of the outlet (m) | The minimum altitude of a basin |
|
| Total length of channels within the drainage basin (km) | The stream length was computed based on the law proposed by Horton | [16] |
| Total length of 20 m contour lines within the drainage basin (km) | The sum of the 20m contours' length that cross the drainage basin area | [17] |
Sl | Slope of the basin |
| [17] |
D | Drainage density |
| [16] |
R | Relief of the basin (m) |
| [18] |
Hdiv.mean | The mean elevation of the divide (m) | From averaging the elevations of the divide | [19] |
Hcentr | The elevation of the centroid (m) | Centroid placed with the center of gravity method |
|
Llfp | The length of the longest flow path in the basin (km) | Basin length is estimated as the longest dimension of the basin parallel to the principal drainage line | [20] |
Sllfp | Slope of the longest flow path | Elevation difference along the main channel | [20] |
M | Meltons’ ruggedness number |
| [21] [22] |
Circ | Circularity of the basin |
| [23] |
Elong | Elongation of the basin |
| [20] |
Comp. | Compactness factor |
| [24] |
Rratio | Relief ratio |
| [20] |
Rgd | An index of ruggedness |
| [25] |
R2 | Another expression of relief |
|
|
Rratio2 | Another expression of relief ratio |
|
|
Rgd2 | Another expression of ruggedness |
|
|