Mechanical Properties | Requirements for Wheel Production | Magnesium Alloys | ||||||||||||||
AM100 | AS41 | AZ31 | AZ61 | AZ80 | AZ81 | AZ91 | EZ33 | HK31 | ZE41 | ZK60 | AM20 | AM60 | AM70 | WE43 | ||
Specific Strength (MPa*cc/g) | Minimum 80 MPa*cc/g | 144.75 | 118.64 | 146.89 | 172.22 | 191.67 | 153.33 | 127.07 | 76.50 | 145.25 | 112.64 | 196.72 | 117.98 | 133.33 | N/A | 135.87 |
Ductility (Elongation) | Minimum 7% | 7% | 6% | 15% | 16% | 5% | 15% | 3% | 2% | 21% | 5% | 12% | 20% | 13% | N/A | 7% |
Fatigue Strength (MPa) | Minimum 75 MPa | 70 | N/A | 120 | 125 | 100 | 76 | 95 | 100 | 70 | 130 | N/A | N/A | N/A | N/A | N/A |
Impact Strength (J) | Minimum 3 J | 2.0 | 2.5 | 3.2 | 2.2 | N/A | 4.5 | 1.3 | 0.8 | 3.0 | 1.4 | N/A | 4.2 | 3.0 | 1.8 | N/A |
Corrosion Rate (mg/cm2/day) | Minimum 0.64 (mg/cm2/day) | N/A | 0.25 | N/A | N/A | N/A | N/A | 0.63 | N/A | N/A | N/A | N/A | N/A | 0.13 | N/A | N/A |
Galvanic Corrosion | Zero tolerance | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied | Satisfied |
Tensile Strength (MPa) | N/A | 262 | 210 | 260 | 310 | 345 | 276 | 230 | 140 | 260 | 205 | 360 | 210 | 240 | N/A | 250 |
Yield Strength (MPa) | N/A | 124 | 140 | 200 | 230 | 250 | 85 | 169 | 95 | 195 | 140 | 295 | 90 | 130 | N/A | 162 |
Density (g/cc) | N/A | 1.81 | 1.77 | 1.77 | 1.80 | 1.80 | 1.80 | 1.81 | 1.83 | 1.79 | 1.82 | 1.83 | 1.78 | 1.80 | N/A | 1.84 |