| Scope |
Measures for energy efficiency improvement |
| Illumination [13] |
Installation of more energy-efficient lighting |
| Matching of the illuminance and the purpose at the workplace |
|
| Application of light sensors which adjust the illumination |
|
| Installation of motion detectors |
|
| Pneumatic systems [14] |
Detection and reduction of leaks |
| Converting into electric tools where possible |
|
| Usage of variable speed drive compressors |
|
| Electric drives [15] |
Usage of energy efficient motors (IEC standard 60034-2-1 or CEMEP efficiency category) |
| Utilization of variable speed drives (VSD) |
|
| Preferential usage of direct drives to reduce the friction losses |
|
| Switching on or off in a targeted manner of the drives |
|
| Selection of an energy efficient type of transmission |
|
| Pumping systems [14] |
Reduction of the flows through variable speed drives (VSD) |
| Reduction of the flows through effective time control |
|
| Ventilation and Air-conditioning technology [14] |
Reduction of the air flows through variable speed drives (VSD) |
| Reduction of the flows through effective time control |
|
| Usage of air curtains for shuttle doors |
|
| Supply of heat and cooling at the right temperature |
|
| Taking advantage of free cooling |
|
| Maintenance of adequate tire pressure |
|
| Optimization of the storage location to reduce the transport distance |