| Material and Manufacturer | Composition | Application | Lot number |
| Clearfil Majesty ES-2 Nanohybrid composite, (KURARAY Medical Okuyama, Japan) | bisphenol A diglycidylmethacrylate Silanated barium glass filler Pre-polymerized organic filler Hydrophobic aromatic dimethacrylate Hydrophobic aliphatic dimethacrylate dl-Camphorquinone, Accelerators, Initiators, The inorganic filler 78 wt%, 40 vol%. 0.37 - 1.5 μm. | Placement of the chosen shade of the paste into the cavity and light-cure with a dental curing unit. Considering the depth of cure, incremental curing may be required. | 00020A 00006A |
| Filtek Ultimate Body Nanofill composite, (3M ESPE St Paul, MN, USA) | bis-GMA, UDMA, TEGDMA, bis-EMA, PEGDMA The fillers are a combination of non-agglomerated/non-aggregated 20 nm silica filler, non-agglomerated/non-aggregated 4 to 11 nm zirconia filler, and aggregated zirconia/silica cluster filler (comprised of 20 nm silica and 4 to 11 nm zirconia particles). The inorganic filler 72.5 wt%, 55.6 vol% 0.6 - 10 μm. | Place and light cure restoration in increments for 10 s with Elipar™ S10 (LED lights with output 1000 - 2000 mW/cm2) | N438989 N441522 |
| Clearfil Universal Bond (KURARAY Medical Okuyama, Japan) | bisphenol A diglycidylmethacrylate 2-hydroxyethyl methacrylate 10-Methacryloyloxydecyl dihydrogen phosphate (MDP) Hydrophilic aliphatic dimethacrylate Colloidal silica Ethanol dl-Camphorquinone, Silane coupling agent, Accelerators, Initiators, Water | Apply BOND and rub it in for 10 s. Dry the entire cavity wall sufficiently by blowing mild air for more than 5 s until bond does not move. Use a vacuum aspirator to prevent bond from scattering. Light-cure bond with a dental curing unit | 2B0005 |
| Adper Single Bond Universal (3M ESPE St Paul, MN, USA) | MDP phosphate monomer Dimethacrylate resins HEMA Vitrebond copolymer Filler, Ethanol, Water, Initiator Silane | Apply etchant for 15 s. Rinse thoroughly with water for 15 s. Rub the entire tooth structure for 20 s. Direct a gentle stream of air over the liquid for about 5 s until it no longer moves. Light cure for 10 s. | 494756 |