Load (MPa) | Temp ˚C |
|
|
|
|
| ||
Max (bottom) | Min (Top) | Max (bottom) | Min (Top) | Material | Max. deformation, mm | Von-mises, MPa | Safety/Failure | Material yield stress MPa |
100 | 10 | 600 | 400 | Al 10% composites | 0.192 mm | 129.65 MPa | Safe | 257 MPa |
100 | 10 | 600 | 400 | Al 20% composites | 0.16189 mm | 131.94 MPa | Safe | 263 MPa |
100 | 10 | 600 | 400 | Al 30% composites | 0.1268 mm | 132.93 MPa | Safe | 269 MPa |
100 | 10 | 600 | 400 | Titanium Alloy (Ti 834) | 0.00986 mm | 202.87 MPa | Safe | 910 MPa |
100 | 10 | 600 | 400 | CuNi3Si Alloy | 0.1816 mm | 340.94 MPa | Safe | 550 MPa |