| Type of varnish | pH value | Density (g∙cm−3) | Viscosity (snDINCup/4m) | Amount applied (g∙m−2) | Nozzle gap (mm) | Air pressure (bar) |
| Pu (filler) | 5.94 | 0.98 | 18 | 125 | 1.8 | 2 |
| Pu (finishing) | 4.01 | 0.99 | 18 | 125 | 1.8 | 2 |
| Sn | - | 0.94 | 18 | 100 | - | - |
| Wb ASTM D-17 (primer) | 9.17 | 1.014 | 18 | 100 | 1.3 | 1 |
| Wb ASTM D-65 (filler) | 9.30 | 1.015 | 18 | 67 | 1.3 | 1 |
| Wb ASTM D-45 (finishing) | 8.71 | 1.031 | 18 | 67 | 1.3 | 1 |
| Cv | 2.9 | 0.955 | 20 | 125 | 1.8 | 3 |
| Cv (finishing) | 3.4 | 0.99 | 20 | 125 | 1.8 | 3 |
| Ac (filler) | 4.3 | 0.95 | 18 | 125 | 1.8 | 2 |
| Ac (finishing) | 4.6 | 0.97 | 18 | 125 | 1.8 | 2 |
| Ah (finishing) | 8.0 | 0.99 | 18 | 100 | 1.8 | 3 |