Button

Function

System Info

Clicking the button triggers a command sent to the microcontroller through GSM, resulting in the user receiving an SMS notification containing system information.

Restore to Default

Clicking the button triggers a confirmation alert for restoring the system to default automatic mode. After confirmation, a command is sent via GSM to the microcontroller, initiating the system restoration and notifying the user through an SMS. If no confirmation is received, the process is aborted, and the system remains unchanged.

Switch to ENEO

Clicking the button triggers a confirmation alert to switch the power source to ENEO. After confirming, a command is sent via GSM to the microcontroller instructing it to exclusively enable power supply from ENEO. The user receives an SMS notification confirming the power source change. If no confirmation is received, the process is aborted, and the power source remains unchanged.

Switch to Solar

Clicking the button prompts a confirmation alert for switching the power source to Solar. Upon confirmation, a command is sent via GSM to the microcontroller, instructing it to enable power supply solely from the Solar source. The user receives an SMS notification regarding the successful power source switch. If no confirmation is received, the process is aborted, and the power source remains unchanged.

Switch to Gen

Clicking the button triggers an alert asking the user to confirm the switch of power source to the generator (Gen). If the user confirms, a command is sent via GSM to the microcontroller, instructing it to activate the generator as the sole power source. The user is then notified of the successful power source switch through an SMS. If the user does not confirm, the process is aborted, and the power source remains unchanged.

Send Command

Clicking the button sends the command entered in the text box to the microcontroller through the GSM module.